Toll free 1-800-401-9436 Call Now






Connecting Cannon Printer to Wi-Fi

For those who have more than one PC at home, printing via Wi-Fi has clear advantages once you connect Cannon printer to Wi-Fi. The printer is available to all computers at any time and can be set up where it is most convenient for everyone involved. Since the printer communicates with desktop PC, notebook or net book via radio, you also save a lot of cables.

Canon printers are available, easy to operate, have a good value for money. Models of this brand have positively proven themselves in the market. If installation with a cable usually does not cause problems, connect Cannon printer to Wi-Fi mode can be difficult. Consider how to connect a Canon printer via Wi-Fi to a computer or laptop, using the example of the popular Cannon printers available with Wi-Fi interface.

What you need for printing over Wi-Fi

The requirements of for a Wi-Fi network are already fulfilled in most households with Internet access. A desktop PC with WLAN antenna and a wireless router are standard. Notebooks and net books are equipped anyway for the wireless data exchange. Only a WLAN-enabled printer or a multifunction device might be missing. When buying new you should make sure that the device has a Wi-Fi interface so that you can easily connect your Cannon printer to Wi-Fi.

A few simple steps to connect Cannon printer to Wi-Fi

Here are the few basic steps that you need to follow in order to connect Cannon Printer to Wi-Fi:

  • Connect the printer to the mains.
  • Press and hold the Wi-Fi button until the power-on lamp blinks.
  • Press the buttons of black printing, color printing and Wi-Fi. The power indicator will stop blinking and will light constantly.
  • Activate Wi-Fi on a computer or laptop to connect a Cannon printer to Wi-Fi.
  • In the list of displayed equipment, find the printer model.
  • Enter the requested password. As a password, new printers enter a serial number, which can be viewed directly on the printer.
  • If there were no failures during the execution of the algorithm, then the connection was successful, and you can start working.

Connection using Wi-Fi Protected Setup

Printers of the Cannon line support connection via a router using WPS. This method allows you to avoid entering passwords and facilitates the installation of equipment. In our case, the method is recommended for Canon MG3640 printer model. In order to use WPS, you must check the router settings and, if necessary, activate WPS before setting up the printer. The router must be equipped with a WPS button in order to connect Cannon Printer to Wi-Fi.

The algorithm to connect the printer to a Wi-Fi:

  • Connect the printer to the mains.
  • Press and hold the Wi-Fi button until the power-on lamp blinks so that to connect Cannon printer to Wi-Fi.
  • On the router, press and hold the WPS button.
  • When the printer and the router connect, the indicator on the printer will light up constantly.
  • The search procedure for the printer’s router takes several minutes, but in the future it will ensure uninterrupted access of the MFP to your network.

If you want to perform a wireless printing by connecting Cannon printer to Wi-Fi, then this article will definitely going to help you. If you are beginner and facing lots of trouble with set up of your newly brought Cannon printer, then come to us as we have a team of experts to assist you regarding all sorts of technical help for printer set up, installation, connection and lots more.